DARK Rub-in powder No. 15, 0.5 g

DARK RUB-IN POWDER - powder for creating various nail designs. The powders are available in different shades and effects. They have varying levels of transparency, allowing you to achieve different results depending on the base.

DESCRIPTION:

• contains fine powder particles for an ultra-mirror effect;
• offered in 11 trendy shades - from bright metallics to pearlescent tones;
• suitable for both light and dark shades;
• applies evenly and effortlessly;
• does not lose shine;
• economical to use due to the high pigment density.

HOW TO USE:

1. Perform a manicure and standard nail preparation;
2. Apply SCOTCH BASE and a leveling base or color;
3. Cover the nail with a non-sticky top coat (you may use DARK camouflage tops), cure under a lamp for 30 seconds;
4. Rub the powder onto each nail with a bare finger or a cosmetic sponge;
5. Remove excess powder using a soft bristle brush;
6. Refine the free edge with a file or buffer for better adhesion;
7. Apply a thin layer of SCOTCH BASE to the lower half of the nail and seal the free edge, cure for 60 seconds;
8. Apply a non-sticky top coat and seal the edge once more, cure for 90 seconds. Do not file the free edge after the top coat.

WORKING NOTES:

• Do not cure the top coat for more than 30 seconds before applying the powder;
• Avoid applying rub-in powder with gloves, as they may leave micro-scratches;
• If the powder does not adhere, cleanse the nail and quickly apply the powder, or cure the top coat for less than 30 seconds;
• The powder can be applied on color or on base/gel after removing the sticky layer (if the surface is even);
• Do not use a stiff brush as it may scratch the applied powder surface;
• On sharp corners or for clients with high manual activity, powder durability may decrease.