STAMPING PLATE DARK 03

DARK PLATE - a metal plate for creating designs in the stamping technique. It has deep and clear patterns for convenient work. A wide selection of designs allows you to quickly and easily make any pattern. DESCRIPTION: - have quality engraving for convenient work; - allow for even complex designs without drawing skills; - recommended to use together with DARK STAMPING POLISH and DARK Stamping Tool. APPLICATION METHOD: 1. Perform a manicure and apply base/gell or color, dry in the lamp; 2. If there is a sticky layer present - remove the sticky layer using DARK GEL CLEANSER; 3. Apply polish to the plate, use a scraper to remove excess and transfer the pattern to the stamper; 4. Transfer the pattern from the stamper to the nail with a rolling or flat motion; 5. Cover with top coat (if the top coat runs off the pattern - apply a thin layer of clear base first, and then the top coat). WHY THE PATTERN MAY NOT TRANSFER TO THE STAMP: 1. The polish should not be thickened, you need to take enough polish on the brush to distribute it over the pattern; 2. Apply polish to the plate with 1-2 strokes, the longer you apply, the greater the chances that the transfer will be worse because the polish dries in the air; 3. Work with the scraper at an angle of about 45 degrees, while not pressing too hard to avoid 'squeezing' the polish out of the pattern; 4. Work quickly with the scraper (2-4 strokes are enough), without sweeping across the entire plate; 5. Then quickly set down the scraper and take the stamper in your hand (remember that we have no extra time when working with polishes); 6. Transfer the pattern to the stamper with a gentle rolling motion, DO NOT try to PRESS the stamper hard into the plate, the more you press, the more polish will remain in the plate.