DARK STAMPING POLISH №10 BLUE, 10 ML

STAMPING POLISH DARK are stamping polishes that transfer easily with proper technique, offering a wide color palette and intense pigmentation. They are not thick and work with all types of stampers.

Directions for use:

• Perform a manicure and apply base/gel or color, cure under the lamp;
• If a sticky inhibition layer is present, remove it with DARK GEL CLEANSER;
• Apply the polish to the plate, use the scraper to remove the excess and transfer the image to the stamper;
• Transfer the image from the stamper onto the nail with a rolling or straight motion;
• Apply top coat (if the top flows off the design, apply a thin layer of clear base first, then the top coat).

Why the image may not transfer onto the stamper:

1. The polish should not be too thickened; make sure to pick up enough polish on the brush to fully cover the design;
2. Apply the polish to the plate in 1-2 strokes; the longer you work, the lower the quality of the transfer, as the polish dries in open air;
3. Use the scraper at an approximate 45-degree angle without pressing too hard, to avoid pushing polish out of the design;
4. Scrape quickly (2-4 movements are enough) without sweeping across the entire plate;
5. Quickly set down the scraper and pick up the stamper (remember, time is limited when working with stamping polishes);
6. Transfer the image to the stamper with a gentle, rolling motion. DO NOT press the stamper hard into the plate; the harder you press, the more polish will remain on the plate.

Volume: 10 ml.