DARK STAMPING POLISH №07 RASPBERRY, 10 ML

STAMPING POLISH DARK - these are stamping polishes that transfer easily when used correctly, have a wide palette and rich pigmentation. They are not thick and work with all types of stamps. HOW TO USE: - perform a manicure and apply base/gel or color, cure in the lamp; - if there is a sticky layer - remove the sticky layer using DARK GEL CLEANSER; - apply polish to the plate, scrape off the excess with a scraper and transfer the image to the stamper; - transfer the image from the stamper to the nail with a rolling or even motion; - top coat (if the top runs off the design - apply a thin layer of clear base first, then top coat). WHY IMAGE TRANSFER MAY NOT WORK: 1. The polish should not be thickened, you need to pick up enough polish on the brush for it to be enough for distribution over the design; 2. Apply polish to the plate using 1-2 strokes, the longer you apply the polish - the more chances there are that it will transfer worse, as the polish dries in the air; 3. Work with the scraper at an angle of about 45 degrees, without pressing too hard, so as not to 'squeeze' the polish out of the design; 4. Work quickly with the scraper (2-4 strokes are enough), without sweeping over the entire plate; 5. Now you need to quickly set the scraper aside and take the stamper in hand (remember that when working with polishes - we don’t have extra time); 6. Transfer the image to the stamper with a soft rolling motion, DO NOT try to PRESS hard the stamper into the plate, the more you press - the more polish will remain on the plate. Volume - 10 ml.