DARK 09 stamping plate

**DARK STAMPING PLATES** is a metal plate for creating designs using the “stamping” technique, has deep and clear patterns for convenient work. A large selection of designs allows making any pattern quickly and easily.

DESCRIPTION:

- have high-quality engraving for convenient work;
- allow making even complex designs without drawing skills;
- recommend using together with DARK STAMPING POLISH and DARK Stamp for stamping.

HOW TO APPLY:

1. Manicure and apply base coat/gel or color, dry in a lamp;
2. If there is a viscous sticky layer, remove the sticky layer using DARK GEL CLEANSER;
3. Apply nail polish to the plate, remove the excess with a scraper and transfer the pattern to the stamp;
4. Transfer the pattern from the stamp to the nail with a rolling or even movement;
5. Apply top coat (if the top coat runs off the pattern, apply a thin layer of transparent base coat, and only then top coat).

WHY THE IMPRINTING OF THE PATTERN ON THE STAMP MAY NOT WORK:

1. The nail polish should not be too thick, you need to put enough nail polish on the brush to spread it over the pattern;
2. Nail polish should be applied to the plate using 1-2 movements, the longer you apply the nail polish, the more chances there are that it will be imprinted worse, because the nail polishes dries in the air;
3. Work with the scraper at an angle of approximately 45 degrees, while not pressing so as not to “squeeze” the nail polish out of the pattern;
4. Work with the scraper quickly (2-4 movements are enough), while not making a sweep over the entire plate;
5. Next, you need to quickly put the scraper and take the stamp in your hands (remember that when working with nail polishes - we do not have extra time);

Transfer the pattern to the stamp with a soft rolling motion, DO NOT try to PRESS the stamp hard into the plate, the more you press, the more nail polish will remain in the plate.