DARK IRON GEL №05, 15 ML

DARK IRON gel - thick gel consistency - holds the shape well, allowing corners to be built and length to be stretched in the air; - strong, maintains sharp corners that do not wear off; - holds the arch well. APPLICATION METHOD: 1. Prepare the nail plate with a 180/240 grit file (there should be no pterygium, remover, or moisture left on the nail); 2. Degrease well; 3. For adhesion, apply SCOTCH BASE in a thin layer over the entire nail plate close to the cuticle and side walls, it is recommended to thoroughly remove the sticky layer from the base before applying the hard material for better adhesion (or work with mechanical preparation); 4. Perform nail strengthening or modeling, filing; 5. Polymerization time is 90 seconds at a power of 48 watts; 6. Cover with gel/base/top according to the working technique. Cure the top for 90 seconds. - IF PERFORMING strengthening - be sure to file your nail at least 1 mm from the inside to avoid lifting from the free edge. Do not recommend Iron gel for upper forms (can only be used with quality lanterns).