DARK STAMPING POLISH №05 YELLOW, 10 ML

STAMPING POLISH DARK are stamping polishes that transfer easily with correct technique, offering a wide palette and intense pigmentation. They are not thick and are compatible with all types of stamping tools.

Directions for use:

• Perform a manicure and apply a base/gel or color, cure under the lamp.
• If a sticky inhibition layer appears, remove it with DARK GEL CLEANSER.
• Apply the polish onto the stamping plate, scrape off any excess with a scraper, and transfer the design onto the stamper.
• Transfer the design from the stamper to the nail using a rolling or even motion.
• Seal with top coat. If the top coat slides off the design, apply a thin layer of transparent base before the top coat.

Common reasons the pattern does not transfer to the stamper:

1. The polish should not be too thick and an adequate amount should be used to cover the design.
2. Apply the polish to the plate in 1-2 motions. The longer you take, the worse the transfer, as the polish dries quickly in air.
3. Hold the scraper at about a 45-degree angle and press lightly, so as not to wipe polish out of the design.
4. Work quickly with the scraper (2-4 swipes are enough) without moving across the entire plate.
5. Immediately set aside the scraper and pick up the stamper (time is limited when working with stamping polish).
6. Use a gentle rolling motion to pick up the design; DO NOT press the stamper hard onto the plate. The more pressure, the more polish will remain in the plate.

Volume: 10 ml.